Specialized  2010 Pitch Pro

Born from the same brains that brought you the Enduro SL, the Pitch™ levels even the most demanding All Mountain terrain with a tough M4 advanced alloy frame, 140mm of FSR suspension and a generous helping of top-shelf specs, including RockShox, FOX and Avid components.

• Pitch disc-specific double-wall rims with eyelets provide the durability needed for All Mountain terrain
• RockShox Pike 351 140mm-travel fork with lightweight alloy steerer features highly tunable Solo Air spring and Motion Control damping for perfectly dialed bump performance
• Fox RP2 air spring shock features rebound adjust with settings for efficient ProPedal performance or fully open to best suit the terrain being covered
• Truvativ GXP2 2.1 2-piece crankset with 24/36-tooth lightweight alloy rings and alloy bash guard for stiffness, durability and efficient climbing/descending
• Avid Elixir 4 full hydraulic disc brakes with alloy backed organic pads and G2 Clean Sweep rotors for durable, balanced and controlled stopping power

SPECIFICATIONS

FRAME	Pitch frame, M4 tubing, double ORE downtube, DMD front derailleur mount, sealed cartridge bearing pivots, replaceable hanger, bolt on cable guides, 150mm travel
REAR SHOCK	Fox RP2, 2 position shock with pro-pedal or full-open, rebound adj., 7.875x2.25"
FORK	Rockshox Pike 351 for Specialized, 140mm travel, Solo air, Motion Control damper, disc only, alloy steerer, rebound adj., Maxle light included
HEADSET	1-1/8" threadless, loose ball
STEM	3D forged alloy, 4-bolt, 31.8mm, 8 degree rise
HANDLEBARS	Alloy mid rise bar, 31.8mm, 680mm wide, 9 degree back sweep, 6 degree up
GRIPS	Specialized waffle lock on grip (S/M) Specialized Thick lock on grip (L/XL)
FRONT BRAKE	Custom Avid Elixir 4, full hydraulic, alloy backed organic pads, G2 Clean Sweep rotor, 203mm
REAR BRAKE	Cutsom Avid Elixir 4, full hydraulic, alloy backed organic pads, G2 Clean Sweep rotor, 185mm
BRAKE LEVERS	Avid Elixir 4 Hydraulic
FRONT DERAILLEUR	Shimano M660 SLX, DMD, top swing, dual pull
REAR DERAILLEUR	SRAM X-9, 9-speed, mid cage
SHIFT LEVERS	SRAM X5 trigger
CASSETTE	Shimano HG50, 9-speed, 11-34t
CHAIN	KMC X9 w/ reuseable Missing Link
CRANKSET	Truvativ GXP2 2.2, 2-piece crank set, AA rings, outboard bearing BB, S: 170mm, M/L: 175mm
CHAINRINGS	36 x 24T
BOTTOM BRACKET	Truvativ outboard bearing, included w/ crank
PEDALS	None
RIMS	Pitch Disc specific, 26mm, pin joint, eyelets, 32h
FRONT HUB	Hi-Lo disc, 20mm thru-axle, 36h
REAR HUB	Disc, double sealed cartridge bearing, high/low flange w/ OS contact side, 32h, QR
SPOKES	1.8mm (15g) stainless
FRONT TIRE	Specialized Eskar Control, 26x2.3", 60 TPI, tubeless ready, aramid bead
REAR TIRE	Specialized Eskar Control, 26x2.3", 60 TPI, tubeless ready, aramid bead
INNER TUBES	Ultralight presta valve
SADDLE	Specialized Enduro BG, 7mm Cr-Mo rails
SEATPOST	6061 alloy, 2-bolt micro adjust setback head, 30.9mm
SEAT BINDER	Alloy collar w/ QR, 34.9mm clamp ID
NOTES	Protective clear coat, derailleur hanger, reflectors, owners manual

GEOMETRY

Size	S	M	L	XL
Seat Tube Length - Center to Top	421mm	444mm	483mm	533mm
Top Tube Length (Horizontal)	565mm	586mm	620mm	645mm
Top Tube Length (Actual)	553mm	574mm	606mm	632mm
Chainstay Length	421mm	421mm	421mm	421mm
Bottom Bracket Height - Low Setting	356mm	356mm	356mm	356mm
Seat Tube Angle (Actual) - Low Setting	71.9°	71.9°	71.9°	71.9°
Seat Tube Angle (Effective) - Low Setting	74°	74°	74°	74°
Head Tube Angle - Low Setting	67°	67°	67°	67°
Wheel Base	1126mm	1148mm	1183mm	1211mm
Standover Height	742mm	748mm	759mm	765mm
Head Tube Height	102mm	108mm	128mm	150mm
Handlebar Width	680mm	680mm	680mm	680mm
Stem Length	60mm	60mm	75mm	90mm
Crank Length	170mm	175mm	175mm	175mm
Seatpost Length	350mm	350mm	400mm	400mm
Stack	559mm	565mm	581mm	603mm
Reach	430mm	450mm	480mm	496mm
Ground-Top	915mm	921mm	937mm	959mm

TT is measured horizontally from center of HT to center of ST