NS Bikes  2010 Rotary Hub (Rear)

This rear hub is a real street/dirt mountain bike disc brake SS hub (135/10) using pure bmx technology. Say no to the heavy hubs taken straight from bmx catalogues with tiny & weak driver bearings & weak 3/8" axles. The Rotary hub is so light because we decided to shave any unnecessary weight to the limit without sacrificing the strength at all.

Instead of a long and weak 3/8” axle we used a bigger diameter axle & steel hardware on the drive side to make it almost indestructible. No more adjusting, no more unscrewing or stripped cone nuts - they are steel & slip-on. No external threads to damage. Hollow 3/8” bolts with 17mm hex heads & 8mm inner hex slot will fully immobilize your wheel in the dropouts. The driver runs on a bushing eliminating the need to use tiny and week bearings. It’s strong as hell and run smooth. Engagement is really good – this hub won’t skip.

Please also note that we added one special feature you were asking for - this hub is really loud!

Specs:
- Material: 6061 alloy body, 7075 alloy axle & left cone, steel driveside hardware.
-O.L.D 135mm.
- 10T driver.
- Bolts: 3/8”x24tpi.
- Weight: 415g.
- Available in 32h and 36h versions.
- Colours: black, violet, silver-blue.

Key Features:
- Female axle (inner oversize axle + side bolts) - this solution rules!
- Hollow AL7075 Axle.
- Custom steel NS 3/8" hollow bolts with 17mm hex head and 8mm hex wrench socket.
- Integrated Bushing driver.
- 3 pawls with 30 engagement points / each 12 degrees.
- Slip-on steel cone on drive side and alloy cone on disc brake side.