Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

45NRTH Stud Insertion Wrench
$13.99
The 45NRTH stud tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. Aluminum carbide studs sold separately. - POM-injected handle - Stainless steel barrel - Thumb and index-finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft
45NRTH Gravdal 700c
$95.00 - $166.99
45NRTH's Gravdal welcomes you to the world of high-performance commuter tires. 252 Studs are carefully positioned across the 700c x 38mm casing profile to yield a high level of confidence and safety. Siped tread lugs and oval-shaped stud groupings provide exceptional cornering, braking and acceleration traction. Run the Gravdal at minimum pressure for unmatched traction performance, and maximum pressure for a quieter and faster ride on clean roads.
45NRTH Hüsker Dü
$124.99 - $159.99
Hardpacked groomed singletrack is the perfect surface for the fast and lightweight Hüsker Dü fatbike tire. Built around the perfect balance of low rolling resistance and traction, shorter center treads roll faster and slightly taller shoulder knobs give more bite when cornering. An overall reduced lug count, combined with a tubeless-ready bead make the updated Hüsker Dü one of the fastest snow tires available.
45NRTH Dillinger 5 26-inch
$158.99 - $312.99
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability
45NRTH Flowbeist
$189.99
Flowbeist was made to attack groomed single track with confidence. Designed for optimal use as a front tire, its wide 4.6-inch footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist (sold separately), for the ultimate combination of traction and control.
45NRTH Dillinger 4 - 27.5 Studded Fatbike Tire
$198.99 - $273.99
Riding your fat bike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 252 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger's center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.
49°N Standard Innertube (0.9mm) Schrader Valve
$4.99 - $8.99
Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility - 12 and 14 tubes use angled/shorter valves for improved pump head clearance/accessibility - Easily identifiable from the GREEN color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with standard removable Schrader valve core - Packaged individually (carton/box)
49°N Traditional Saddle Clamp
$4.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
49°N Alloy Seat Clamp
$8.99
Forged Alloy seat-clamp.
49°N Alloy QR Seat Clamp
$9.99
Forged Alloy seat-clamp with QR lever.
49°N Bike Streamers
$9.99
Fun handlebar-mount streamers. - Quick and easy installation
49°N Steel Repair Bar
$13.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
49°N Bolted Skewer Set
$14.99
Front and rear skewer set, suitable for MTBs - Durable chromoly axles with lightweight alloy nuts - Tightens with allen key
49°N Quill to Threadless Stem Converter
$15.99
Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp
49°N Adjustable Threadless Stem
$19.99 - $35.99
Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation
49°N Alloy Seatpost
$19.99
Durable alloy construction - Quick and easy 1-bolt adjustment - 400mm length
49°N Alloy Quill Stem
$21.99
Lightweight and durable forged alloy stem. - Removable faceplate for easy bar installation - 30 degree rise - Fits 25.4mm handlebars
49°N Apex Lock-On Grip
$21.99
Gel rubber construction for the optimum balance of comfort and durability. - Medium-profile diamond pattern provides excellent grip - Dual lock-on clamps for maximum security - OD: 31mm - Length: 130mm
49°N Perch Comfort 182 Saddle
$25.99
A wider width saddle with generous levels of padding that offers excellent comfort and support for upright riding positions with a distinct rearward weight bias (think handlebars slightly higher than the saddle) and those looking to boost comfort levels a great all-arounder! - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 228 x W 182mm - Weight: 396g (excl. saddle clamp)
49°N Perch Women's 153 Saddle
$25.99
Marketed primarily as a women's saddle but may well find male fans also, particularly of the MTB variety, thanks to its neutral curved shape, reduced length and generous width. - A rounded profile saddle with thick, plush padding that favors a more upright, rearward weighted position (think handlebars slightly higher than the saddle) and those looking to boost comfort levels! - Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road - Rearward located v-shaped pressure relief channel combines effectively with the base cutout to help alleviate localized pressure on the sensitive perineum area and keep the blood flowing - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 255 x W 153mm - Weight: 312g
49°N Formfit Sport Memory Foam Saddle Cover
$30.99
The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology! - Temperature-sensitive memory-foam padding forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits regular/narrower road & MTB saddles from approx. 130 - 160mm width - Dimension: L 275 x 195mm - Weight: 215g
49°N Adjustable Stem
$34.99
Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.
49°N Threadless Stem Height Extender
$37.99
Lightweight 6061 alloy. - Provides up to an additional 117mm of extension - 1 1/8" - 223g
Avid Disc Brake Pads (Juicy/BB7/BB5)
$23.00 - $37.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid FR-5 Brake Levers
$30.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$32.00 - $76.99
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Disc Brake Pads (Elixir)
$33.00 - $40.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Hydraulic Line Kit
$34.50 - $59.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid BB7 MTN Cable Disc Brake Caliper
$78.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Avid BB7 Road Cable Disc Brake Caliper
$78.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g
Page 1 of 12 Next page