Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Bontrager Rubber Brake Cable Boot
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Jagwire Disc Brake Shims
$1.99
Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.
Problem Solvers Standard Top Cap
$1.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
Bontrager Madone Chainstay Rubber Gasket
$3.99
Product details - Use in chainstay pocket to seal sensor into frame
Bontrager Saddle Clamp
$4.99
- Saddle clamp for straight seatpost - Diameter: 22.2mm
Giant EnergyPak Connector Cover—Integrated
$4.99
- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
Giant EnergyPak Connector Cover—Side Release
$4.99
- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
Giant EnergyPak Connector Cover—Top Release
$4.99
- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.
Shimano Ultegra 6800 Front Derailleur Cable Fixing Assembly
$4.99
Shimano Front Derailleur Cable Fixing Assembly
Race Face Aeffect R Dropper Cable Head and Pinch Barrel
$5.00
RaceFace Aeffect R Dropper Post Small Parts
49°N Traditional Saddle Clamp
$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
ODI Lock-Jaw Clamp Replacement Bolts
$5.99
- Enough clamp bolts for 4 clamps
Wheels Manufacturing Inc. Aluminum Headset Spacers 1-1/8-inch
$5.99 - $26.99
Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum
Wheels Manufacturing Inc. Flat Head Screw
$5.99 - $8.99
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Avid Overcoat Noodle
$6.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
Cane Creek 40-Series 41mm Compression Ring
$6.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
SRAM Power Link Chain Connector
$6.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$6.99 - $24.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Wheels Manufacturing Inc. M8 Derailleur Hanger Bolt
$6.99
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
Cane Creek Thudbuster ST Elastomer
$7.49
Replacement inserts for Thudbuster G4 suspension seatposts.
Shimano Deore XT M8000 Rear Derailleur Cable Anchor Assembly
$7.49
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$7.49
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
KMC MissingLink 6-8-Speed 7.3mm
$7.99
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
KMC MissingLink 6-8-Speed IG 7.1mm
$7.99
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
TRP Tektro A-11 Post Mount +20 mm Caliper Adaptor
$7.99
- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$7.99 - $14.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Cane Creek Norglide Bushing for 14.7mm Bores
$8.19
Replacement bushings for Cane Creek shocks.
SDG Tellis Keyway Set
$8.49
Replacement Polycarbonate Keyway Set. Compatible with All Tellis Dropper Seat Posts.
Shimano BH59 Olive and Connecting Insert
$8.49
Shimano Y8H298040 SM-BH59 Olive and connecting insert
Page 1 of 22 Next page