Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wolf Tooth Components ReMote Light Action Dropper Lever
$93.02 - $115.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wolf Tooth Components ReMote Light Action for Shimano I-Spec EV
$109.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wolf Tooth Components Remote Pivot Axle
$9.99
Wolf Tooth Remote Pivot Axle
Wolf Tooth Components Roadlink
$39.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wheels Manufacturing Inc. ABEC 5 Sealed Steel Bearings
$24.99 - $26.99
- Cartridge steel bearings - ABEC 5 rating - Sold as 1 unit
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$67.99
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$7.99 - $14.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Wheels Manufacturing Inc. Derailleur Hanger 293
$69.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-2 R3 (KP432) - For DT Swiss Thru Axle Not the same as DROPOUT-295. Check for correct thru axle fit.
Wheels Manufacturing Inc. Derailleur Hanger 308
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with either (1) M4x12 or M4x16 Socket Head Screw - Fasteners not Included - For 12x142 and 12x148 Thru Axle - Replaces Niner Part #28-013-13-00-20
Wheels Manufacturing Inc. Derailleur Hanger 326
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Giant Hanger #RE270 - For Shimano Direct Mount derailleurs - Attaches to frame with (2) M4x14 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Repair Pack for 22/24mm (SRAM GPX) Bottom Brackets
$14.99
Replacement spacer pack for Wheels Mfg. 22/24mm (SRAM GXP) bottom brackets. Bearings sold separately. Pack Includes: - (1) - Silicone Dust Seal, 24mm ID Drive Side - (1) - Silicone Dust Seal, 22mm ID Non-drive Side - (1) - 24MM Wave Washer - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer
Varia Singlespeed Chainring Bolts & Nuts
$17.99
- Bolts & nuts for singlespeed chainrings - Chrome-plated steel - 6.5mm
Trek CX Horizontal Sliding Derailleur Hanger
$39.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek Road Derailleur Hangers
$23.99 - $25.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
Shimano 11-Speed Chain Pins
$21.49
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Shimano Dura-Ace R9120 STI Lever Hoods
$44.99
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9120 levers
Shimano Dura-Ace R9150 Di2 STI Lever Hoods
$49.99
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-9150 Di2 levers
Salsa Alternator 1.0 Left Plate
$39.89 - $66.49
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Alternator 1.0 Right Plate
$39.89 - $39.99
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Derailleur Hanger
$24.99 - $29.99
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Salsa Derailleur Hanger For Beargrease Carbon
$26.99
Salsa Derailleur Hanger For Beargrease Carbon
Salsa QBP Derailleur Hanger 687 Black
$32.99
Fits: Salsa Colossal Ti 2015, Salsa Warbird 2016, Foundry Overland 2016.
SRAM GX Eagle Rear Derailleur Pulley Kit
$54.00
GX Eagle Rear Derailleur Pulley Kit
SRAM Guide Ultimate Hose Kit
$67.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
SRAM Power Link Chain Connector
$6.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$24.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM Universal Derailleur Hanger
$22.00
The Universal Derailleur Hanger consolidates thousands of hanger options across the industry. It protects your derailleur against chain jams by pivoting back and out of the way, and slips slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. Plus, if you ever need replacement, it will be available everywhere. The UDH: one hard-working hanger. - The Universal Derailleur Hanger—or UDH—consolidates thousands of mountain bike derailleur standards. - It offers unparalleled derailleur protection and perfect alignment, guaranteed. - The UDH is designed to rotate rearward in the event of impact and features the ability to "re-rail" the chain back onto the small cog. - The UDH works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace.
SRAM XX1/X01/GX Eagle Rear Derailleur Ceramic Bearing Pulleys
$107.00
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
SRAM eTap Lever Hood Covers
$52.99
Replacement hoods for SRAM hydraulic shifter/brake levers.
RockShox Dust Seal and Oil Seal Kit for Argyle, Boxxer, Pike, Reba, Recon, Revelation, Tora
$40.00
- 28mm for Dart, Judy, J2, J3, Pilot,Sid (pre-2008) - 32mm for Argyle, Boxxer (pre-2009), Pike, Reba, Recon, Revelation, Tora - 35mm for Domain, Lyrik - 40mm for Totem
Page 1 of 21 Next page