Brakes/Levers/Pads

Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.

Light and smooth, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash. This ambidextrous lever can be used as a front or rear, too.

Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.

Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.

Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.

Key features - Ultra-light direct mount caliper design - Tunable stopping power to dial in the perfect lever feel - Fully adjustable leverage ratio works with all road levers - 95g with hollow arms and TI hardware - For use as front or rear brake - Includes brake pads for aluminum rims

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

TRP’s HY/RD gives you the performance and feel of hydraulic disc brakes with one simple—but significant—change to your existing mechanical disc-equipped road or ‘cross bike. The HY/RD (High Road) uses your current cable to activate the hydraulic caliper for more power and modulation than a conventional mechanical disc brake. The dual-piston caliper engages both brake pads when you squeeze the lever, so a crisp, responsive lever-feel accompanies your excellent stopping power. Available with 140mm or 160mm rotor options, these brakes deliver the perfect amount of control for your needs, whether it’s long, hilly descents or frequent, lower-speed dismounts in cyclocross. Plus, their slim profile tucks in neatly for great aerodynamics and minimal obstruction on chaotic ‘cross remounts, so the HY/RDs will only slow you down when you want them to.

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Magura disc brakes.

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro

Jagwire's Mountain Sport Disc Brake Pads (Hope) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that allow the caliper to move as you install your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get excellent caliper alignment! This kit includes ultra-light titanium hardware with washers for CPS (Caliper Positioning System) mounting.

Profile Design's carbon-specific brake pads are specially formulated to improve braking performance when you're using carbon rims. Profile Design's TwentyFour Series wheels require the use of these P220 carbon-specific brake pads.

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Shimano's caliper brakes offer high-power, high-modulation stopping. These brakes feature mid-reach construction for compatibility with tires up to 32mm wide. High-strength aluminum brake arms keep weight down and cartridge brake shoes with conical washers let you dial in them in to suit your riding needs.

In the pursuit of pure downhill speed, there's only one brake to choose: Shimano's Saint Hydraulic Brake Levers. Short pivot Servo-Wave Levers provide excellent pad clearance, faster pad engagement, and 20% more braking power than previous designs. And, free stroke adjustment lets you dial in lever travel for customized brake performance. Single-finger levers feature incredible ergonomics and a dimpled surface for sure grip on your next descent. Tool-free reach adjustment fits these levers to your hands and riding style, so total control will never be far from your hands. These levers are I-Spec compatible so you can keep handlebar clutter to a minimum.

- The Best Balance Between Rigidity, Weight And Stopping Power - More Predictable, Linear Braking Curve - Clear Contact Feeling With Better Linearity - Stabilizer Added Between Axles Work - Sleek Design - Less Gap Between Each Arms - Comfortable Riding With Wider Tire On Rough Road - Better Clearance With Wider Tire - Compatible With 28C Tire Size

- Cartridges: forged aluminum cartridge holders with a threaded mounting post and standard-compound pad inserts (M70R2 versions include mounting hardware) - Inserts: replacements for worn Shimano cartridge pads (includes retention cotter pin) - Molded: 1 piece internal backbone pads with threaded post and hardware

Shimano XT RT81 Centerlock Disc Rotors - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub

- 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors -Requires external-type rotor lockring when installing onto 15/20mm axle hub -Aluminum spider -Includes standard type rotor lockring

Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Looking for a great brake upgrade for your SRAM or Campagnolo-equipped cyclocross bike? TRP's CX-8.4 linear-pulls are the answer. The 84mm-tall CNC'd-aluminum arms work seamlessly with SRAM and Campy levers, and they deliver outstanding stopping power and speed control while providing ample mud clearance. Plus, the integrated barrel adjuster on the noodle makes those on-the-fly adjustments simple. Feathery titanium hardware keeps weight down, and you'll love the brake-pad holders that make toeing-in and replacing the pads a breeze.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.