Filter By:
- Parts & Accessories (10)
- Wheels (8)
- Hubs (4)
- Rims (2)
- Show More Brands
- Show Fewer Brands
Wheels

$3,450.00
- Lighter, wider, stronger and more flat resistant
- Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue
- Wide hookless bead dissipates impact energy and prevents pinch flats.
- 30% increase in impact toughness, 60% more flat resistant
- Optimized for 2.3-2.5" tires

$199.99
A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim and full 8/9/10/11sp road cassette compatibility.
- Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish
- Joytech alloy QR hubs w/serviceable cup and cone bearings
- 11sp Shimano road steel freehub body w/included 1.85mm freehub spacer for full 8/9/10/11sp compatibility
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver)
- 32H/3X lacing
- Presta drilling
- QR levers & high-pressure rim tape included
- Not tubeless compatible
- Weight: 1235g

$199.99
A durable 32H aero track wheel in stealth black finish w/new-school 17mm internal width and flexible fixed/free rear compatibility that's fast enough for the velodrome and tough enough for the streets.
- Pinned construction double wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish
- CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks
- Joytech high flange nutted axle 120mm alloy nutted hubs w/100% serviceable cup and cone bearings
- Fixed/free rear threads for compatibility with either 1.375" x 24TPI screw-on singlespeed freewheel or fixed sprocket & lockring (stepped 1.375" x 24TPI/1.29" x 24TPI)
- Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples
- 32H/3X lacing
- Presta Drilling
- Axle nuts, 16T cog, high-pressure rim tape included
- Weight: 1183g

$168.17
A 700c 6-Bolt disc wheel that is perfectly suited to modern road, CX, or gravel disc applications.
- A lightweight (470g), pinned construction double wall rim with new-school 21mm internal width and offset/asymmetrical construction for better triangulation of spoke angles and balance of tensions, resulting in a stronger, stiffer, and more reliable wheel.
- Joytech alloy QR hubs w/serviceable cup and cone bearings
- Conventional 6-Bolt disc compatible only
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black)
- 32H/3X lacing
- Presta drilling
- QR lever & high-pressure rim tape included
- Not tubeless compatible
- Weight: 1028g

$163.99
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

$159.99
- Alex MD21 disc-specific double wall 29er / 700c rim, Black
- Shimano Deore M525 hubs
- Suitable for Cross-Country, light Trail riding, CX and Road Disc
- Tubeless Ready
- Inner rim width: 21mm
- Outer rim width: 26mm
- Rim height: 18 mm
- Rim weight: 500g
- With eyelets
- Schrader Valve
- 32 holes
- Sapim Leader Stainless spokes - Black
- Cassette Compatibility: Shimano HG
- Hub: Shimano FH-M525
- Rotor Type: 6-Bolt

$154.54
A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim.
- Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish
- Joytech alloy QR hubs w/serviceable cup and cone bearings
- Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver)
- 32H/3X lacing
- Presta drilling
- QR levers & high-pressure rim tape included
- Not tubeless compatible
- Weight: 989g

$147.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms.
- Large Diameter (LD) Axle for 15mm forks
- Fits Chris King ISO LD Front Hubs (15mm and 20mm only) with serial numbers starting with 171 ONLY
- Allows you to run a 15mm Axle on Chris King ISO LD Front Hubs
- All axles require an adjusting clamp for installation

$139.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness.
- Offset nipple bed for improved spoke tension balance and wheel strength/stiffness
- Strong tire retention bead
- Tubeless ready

$132.92
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we've ever made.
Features:
- TCS 2.0 creates a more robust, easily installed and dependable tubeless system.
- A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim.
- 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

$119.99
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed.
- 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration
- Chromed steel bearings
- Wide bearing stance and axle design reduces flex and adds durability
- Low drag main seal prevents contamination and reduces resistance
- Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

$99.99
An affordable and clever dual-duty rim & disc brake compatible 29"/700c wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use.
- Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide-range of tire widths & ground sidewall
- Joytech 6-Bolt disc alloy nutted hubs w/ serviceable cup and cone bearings
- Anodized brake track for clean looks when used with a disc brake
- Conventional screw-on freewheel fitting (7/8/9/10sp compatible)
- Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/ 12mm brass nipples (silver)
- 36H/3X lacing
- Schrader drilling
- Axle nuts & high-pressure rim tape included
- Weight: Front - 1169g, Rear - 1244g

$84.99
Sta Tru Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27"
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 630 / 27"
- Tire Type: Clincher

$80.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed.
- 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration
- Chromed steel bearings
- Wide bearing stance and axle design reduces flex and adds durability
- Low drag main seal prevents contamination and reduces resistance
- Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

$64.99
Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it.
- Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force
- No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant
- Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance
- Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

$51.99
These original replacements will get your wheels working like new.
- Alloy thru-axle that can be used with a 6mm hex wrench or with a lever
- Keep it light by removing the lever and instead use a 6mm hex wrench
- Keep it convenient by keeping the lever inside the axle
- Lever is held securely by internal O-ring
- Lever sold separately

$33.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$25.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service

$25.00
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
Page 1 of 1